Used Powertrain up to 36 Months / 36K Miles

(888) 521-6162

Used Powertrain Warranties up to 36 Months / 36K Miles

Mon - Fri: 8am - 5pm, Sat - Sun: Closed

6-36 Month Warranties

See Warranty Options Here

(888) 521-6162

We Ship Local.
Hablamos Español.

Connect with

#[H2 SUB-HEADLINE]

#[H1 HEADLINE]

Part #
Year
Manufacturer
Model
Condition
Fuel Type
Engine Size
Horsepower
Turbo
Transmission Type
Drivetrain
Transmission
Additional Specs

Used EnginesInventory

Reman EnginesInventory

Diesel EnginesInventory

Reman DieselInventory

Zero Mile Reman Power for Your Sorento

This 2015 Kia Sorento 3.3L reman engine is a remanufactured 3.3 Lambda V6 built to replace the failure prone original motor found in many Sorento SUVs. Based on the G6DH block, it is a gas, DOHC 24-valve V6 with Dual CVVT and chain driven cams, producing 290 horsepower. As a remanufactured assembly, it carries zero miles and is restored to OEM specification or better, giving you a fresh, dependable foundation for years of reliable driving.

At Houston Engines, we have supplied used and remanufactured engines, transmissions, and transfer cases since 1989 from our shop at 10626 Airline Dr. in Houston. This Sorento 3.3L unit is direct fit and drop in ready, requiring no custom mounts and no ECU re flash. It is a naturally aspirated, non turbo motor that bolts to the factory 6-speed automatic. We back every reman engine with the confidence that comes from decades of experience in this trade.

Exact Fitment and Engine Specifications

This remanufactured engine fits the 2015 Kia Sorento with the 3.3L V6, and the same G6DH assembly also covers 2014, 2016, 2017, and 2018 Sorento models. The 2015 3.3L is identified by VIN 7 in the 8th digit, with GDI, Gasoline Direct Injection. Confirming that digit against your own VIN before ordering is the single most important fitment check.

The specifications are exact and worth matching carefully. This is a 3.3L V6, displacing 3,342 cc or roughly 204 cubic inches, with an aluminum block and aluminum head. It runs an 11.5:1 compression ratio with a 92mm bore, produces 290 horsepower at 6,400 rpm, and 252 lb ft of torque at 5,200 rpm. It is a gas engine, not turbocharged.

Because Kia and Hyundai share engineering, the G6DH family also appears in the Kia Sedona and Cadenza across 2014 to 2018 model years, with the OEM block manufacturer listed as Hyundai. If you own one of those vehicles, this same Lambda V6 platform may be relevant to your build, though you should always verify your VIN and application with us before purchasing.

Why This Engine Fails

The 2015 Sorento 3.3L is well documented for engine trouble, with dozens of reported failures. Federal investigators flagged the 2014 to 2015 Sorento with the 3.3L as showing failure rates comparable to vehicles under corrective action, which is exactly why so many owners end up searching for a dependable replacement motor.

A primary weak point across 2011 to 2017 Sorentos was the head gasket. Stretched or stripped head bolt threads allowed gaskets to fail, letting coolant and antifreeze mix with engine oil. That contamination leads to overheating and, in severe cases, cracked cylinder blocks and major internal damage that is rarely worth repairing piecemeal.

Other known failure modes include metal shavings in the oil, excessive oil consumption from worn piston rings common to GDI engines, and deep rhythmic knocking that signals bearing damage from oil starvation. Technical bulletin ENG253 and warranty extension WTY035 are referenced throughout owner and technician communities for these exact issues.

A remanufactured engine addresses every one of those weak points directly, which is why it is the smarter long term fix over a questionable used motor. Our reman process starts with a complete teardown. Every component is inspected, cleaned, and either replaced or re machined to factory tolerance. That means a renewed crankshaft, new rod bearings, pistons, rings, connecting rods, camshaft, and timing chain. The cylinder heads receive all required machining along with new valves, keepers, springs, seals, rocker arms, and lifters.

This is fundamentally different from a rebuilt engine, which only swaps the parts that already failed. A remanufactured engine is produced with precision across every piece and restored to OEM specification or better. On this Lambda V6 that attention matters, because head bolt threads, bores, decks, and crank journals are machined back to spec to eliminate the wear points that caused the original failure. A full gasket set and new oil pump round out an assembly built to run like new.

Recent Inventory from Houston Engines

What You Should Verify Before Ordering

Start with your VIN. The 2015 Sorento 3.3L is identified by the 8th digit being a 7, with GDI. Matching that character confirms you have the correct 3.3L V6 and not a different displacement, which protects you from ordering a motor that will not bolt in cleanly.

Next, confirm exactly what hardware comes with your unit. A long block includes the short block, assembled cylinder head, cam, lifters, timed front gear, and full gasket set. A complete engine adds accessories like the water pump, oil pump, manifolds, and sometimes the flywheel. We will tell you precisely what is included.

Finally, check whether a core exchange applies and what your installer needs on hand. Since this motor is direct fit and drop in ready with no custom mounts or ECU re flash required, a competent shop can reuse your factory accessories and sensors where needed and complete a straightforward swap into your Sorento.

Choosing remanufactured over new or used is also a practical and responsible decision. The remanufacturing process reuses the proven core casting while renewing every wear item, which reduces demand for new raw materials, lowers energy consumption, and cuts waste compared to building a new engine from scratch. You get a motor restored to factory standard without the environmental cost of all new production, and without the uncertainty that comes with a salvage unit of unknown history or mileage.

Reliability is the other half of the case. Quality remanufactured engines are built to standards aligned with established quality systems, using premium bearings, pistons, rings, gaskets, seals, and valve train components, with machining accuracy on cylinder walls, decks, line bores, and journals. Fleet operators and commercial users routinely report service lives equal to or greater than new OEM engines when maintenance is kept up. For a Sorento owner, that means genuine confidence in the miles ahead.

Ordering, Delivery, and Support

Houston Engines has served local and nationwide customers since 1989, and we carry gasoline engines for Chevrolet, Ford, Dodge, Ram, and Kia. Our team knows the Sorento 3.3L inside and out, from the GDI identification details to the head gasket history that drives so many of these replacements. When you reach out with your VIN, we confirm fitment first so the engine that arrives is the correct G6DH assembly for your vehicle.

We offer fast local delivery across the Houston area and nationwide shipping, so whether you are repairing a single family Sorento or managing a fleet, you can get this motor where you need it quickly. Our shop at 10626 Airline Dr. keeps an extensive inventory of engines, transmissions, and transfer cases, and we are happy to help you coordinate the right unit and the right accessories for a clean installation.

We are bilingual and happy to assist in English or Spanish, Hablamos Espanol. If you have questions about what is included with this reman engine, how it compares to the used and rebuilt options, or whether it suits a Sedona or Cadenza application, our staff will walk you through the details. Decades of hands on experience back every recommendation we make, so you can order with real confidence.

Frequently Asked Questions

What does remanufactured mean, and is it the same as rebuilt?

No, they are not the same. A rebuilt engine only replaces the parts that already failed. A remanufactured engine is fully disassembled, inspected, cleaned, machined, and reassembled with new or re machined components, restoring it to OEM specification or better across every piece.

What engine code does the 2015 Kia Sorento 3.3L V6 use?

The 2015 Sorento 3.3L V6 uses the G6DH block, a 3.3 Lambda V6 with DOHC, 24 valves, and Dual CVVT. Its OEM block manufacturer is listed as Hyundai, since Kia and Hyundai share engine engineering across many platforms.

How do I know this engine fits my specific 2015 Kia Sorento?

Check the 8th digit of your VIN. For the 2015 Sorento 3.3L with GDI, that character is a 7. Matching that digit confirms you have the correct 3.3L V6. Send us your full VIN and we will verify fitment before you order.

What causes the 2015 Kia Sorento 3.3L engine to fail?

The most common cause is head gasket failure, often from stretched or stripped head bolt threads, which lets coolant mix with oil and causes overheating. Other failures include worn piston rings, excessive oil consumption, metal shavings in the oil, and bearing knock from oil starvation.

Does this remanufactured engine come with a warranty?

Yes. Reputable remanufacturers stand behind their work, and warranty coverage is a strong signal of confidence in the quality of the build. Contact our team for the specific warranty terms that apply to this reman Sorento 3.3L engine before you purchase.

What parts are included in a remanufactured long block engine?

A long block includes the short block plus an assembled cylinder head, camshaft, followers, lifters, the timed front gear group, and a complete upper and lower gasket set. A complete engine adds accessories like the water pump, oil pump, and manifolds. Ask us exactly what your unit includes.

Will this engine fit other Kia models besides the 2015 Sorento?

The G6DH 3.3L assembly also fits 2014, 2016, 2017, and 2018 Sorento models, and the same engine family was used in the Kia Sedona and Cadenza from 2014 to 2018. Always verify your VIN and application with us before ordering.

Do I need to do a core exchange when buying a remanufactured engine?

A core exchange may apply, depending on the unit. Your old engine core is often part of the remanufacturing supply chain. Contact Houston Engines and we will confirm whether a core is required for this Sorento 3.3L reman engine and how the exchange works.

Is this Sorento engine turbocharged, and what is its output?

No, this is a naturally aspirated gas engine, not turbocharged. It produces 290 horsepower at 6,400 rpm and 252 lb ft of torque at 5,200 rpm, with an 11.5:1 compression ratio and a 92mm bore, displacing 3,342 cc, or about 204 cubic inches.

How is this engine delivered and do you ship nationwide?

Yes. Houston Engines offers fast local delivery throughout the Houston area and nationwide shipping. From our location at 10626 Airline Dr. in Houston, we can get this reman Sorento 3.3L engine to your home, shop, or fleet quickly after fitment is confirmed.