Used Powertrain Warranties up to 36 Months / 36K Miles

Mon - Fri: 8am - 5pm, Sat - Sun: Closed

6-36 Month Warranties

See Warranty Options Here

(888) 521-6162

We Ship Local.
Hablamos Español.

Connect with

2014 Silverado 1500 5.3L 4X4 Reman Transmission 6L80

2014 Silverado 1500 6L80 Reman Transmission

Used Engines Inventory

Reman Engines Inventory

Diesel Engines Inventory

Reman 6L80 built for corrected shift reliability

2014 Silverado 1500 6L80 reman transmission

The 2012 Ford Powerstroke 6.7L Diesel Engine is a robust choice for heavy-duty applications, found in the 2012 Ford F250, F350, and F550 models. This turbocharged V8 engine delivers significant torque and horsepower, making it ideal for towing and hauling. Its design ensures both performance and efficiency, with a reputation for reliability and durability. Whether for work or recreation, the 6.7L Powerstroke handles demanding tasks with ease. For more details on its performance and specs, visit our 2012 F250 diesel engine page.

Reman Transmissions

Reman 6L80 built for corrected shift reliability

The 2014 Silverado 1500 6L80 reman transmission is a dependable replacement solution for trucks needing restored shift quality, stable line pressure, and smoother overall drivability. Houston Engines supplies reman 6L80 units that are rebuilt and inspected to address internal wear concerns while reducing the uncertainty associated with used take-out transmissions. This 5.3L 4X4 reman transmission platform is widely used in trucks exposed to towing, stop-and-go driving, and heavy-duty service demands that can contribute to long-term wear. A properly matched replacement supports more predictable operation, improved engagement quality, and dependable long-term service reliability.

Each tested reman 6L80 is prepared with attention to serviceability, corrected internal wear, and practical replacement value for everyday truck use.

Critical internal components are inspected and replaced where necessary, while clutch-related wear areas, sealing surfaces, and structural sections are reviewed before release. Houston Engines 6L80 replacement units are built to help buyers avoid the uncertain internal condition often associated with used transmissions that may already carry heat-related wear or hydraulic performance concerns.

Fitment matters because 6L80 configurations can vary based on drivetrain layout, calibration strategy, and tow-package related details. Buyers should verify VIN, engine size, drivetrain configuration, and 6L80 tow package application details before ordering. Houston Engines supports Silverado transmission fitment verification so the replacement transmission aligns correctly with the intended 2014 Chevy truck transmission setup, helping reduce installation delays and compatibility issues during service, setup, and final startup across the entire replacement process.

Gas Engines | Diesel Engines | Hybrid Engines

Save With Our Large Inventory of Used Engines

Are you in the market for a used engine to get your vehicle back up and running? Look no further than Houston Engines. We offer a wide selection of high-quality, used engines at affordable prices. We pride ourselves on our commitment to customer satisfaction and provide a hassle-free shopping experience for all our clients.

Start by Selecting the Right Engine Type For You

Use the Part Request Tool to Narrow Down Your Vehicle

Use Our Auto Parts Search Tool

Gas Engines

Diesel Engines

Hybrid Engines

Inspection standards and warranty coverage

Reman transmissions are reviewed for structural condition, visible sealing integrity, and practical serviceability before approval for shipment. Quality-control procedures and inspection records support traceability throughout the ordering and fulfillment process, helping ensure dependable replacement quality.

Reman 6L80 warranty coverage is available on qualifying units, with protection tied to proper installation documentation, supporting-system preparation, and fluid-service compliance. Contact us at houston engines for exact warranty details related to this 2014 Silverado 1500 6L80 reman transmission.

begin with cooler flushing, line cleanliness, correct fluid selection, and inspection of all transferred electronics, sensors, and mounting hardware before startup.

Any contamination from the failed transmission should be corrected before the replacement is placed into service to reduce the risk of repeat damage or pressure instability. Verify driveshaft-related connections, crossmember alignment, and application-specific hardware before completing final assembly for proper fitment and function.

After startup, monitor fluid behavior, engagement quality, and transmission temperature through the initial warm-up cycle. Depending on the truck’s programming strategy, relearn or adaptation procedures may also be required after installation. Early post-install review helps protect the tested reman 6L80 during the first service interval, reduces shift-related complaints, and supports stronger long-term drivability, durability, and consistent performance across everyday driving conditions.

Fitment and Application Verification Process Guide

Fitment should always be verified using VIN, drivetrain layout, engine configuration, and tow-package-related details before ordering. Similar 6L80 transmissions may vary based on application-specific factors affecting installation, operation, and compatibility. Proper Silverado transmission fitment verification helps reduce ordering mistakes and avoid installation delays.

Houston Engines can confirm the correct replacement by reviewing identifiers and matching the transmission to the intended 2014 Silverado 1500 5.3L 4X4 application. This ensures smoother installation and reduces mismatched-unit concerns during setup and startup.

For fitment support, reman truck transmission shipping coordination, startup guidance, and warranty questions, contact us at Houston Engines before placing the order. Early application review helps reduce ordering mistakes, unexpected transfer issues, and setup delays during installation and startup while ensuring a smoother, more reliable, and efficient replacement process overall.

Shipping process and reman-transmission delivery details

Reman transmissions are packaged for reman truck transmission shipping on reinforced pallets with protective wrapping and stabilizing materials to reduce movement and transit-related damage. Delivery arrangements vary depending on carrier access, destination type, and lift-gate requirements to support safe transport and delivery.

Inspect the pallet, labels, and packaging carefully before signing for delivery. Photograph any visible damage and document concerns clearly so freight-related issues can be reported quickly if necessary. Proper documentation helps support claims and protects the buyer during the delivery process.

Houston Engines recommends reviewing shipment paperwork and inspecting the transmission thoroughly before installation begins. A careful receiving process helps protect the buyer, supports freight claims when needed, and keeps the replacement schedule moving forward with fewer avoidable delays during the installation process.

Frequently Asked Questions (FAQs)

Frequently Asked Questions (FAQ)

Is this a reman transmission or a used unit?

This listing is for a used 2016 Silverado 1500 5.3L engine. It is inspected and tested for serviceability but is not a full remanufactured engine unless stated.

Does tow package NHT matter for fitment?

Yes, drivetrain layout and 6L80 tow package application details should be verified before ordering to confirm compatibility.

Are these reman transmissions inspected before sale?

Yes, reman units are reviewed for serviceability, structural condition, and quality-control standards before approval for sale.

What comes with the reman transmission?

Included components vary by unit, so buyers should confirm exactly what is included before purchase.

Is warranty coverage available?

Yes, qualifying units include reman 6L80 warranty protection depending on installation compliance and documentation.

Do I need to clean the cooler and lines first?

Yes, cooler and line contamination from the failed transmission should be corrected before startup to protect the replacement.

Is a relearn or adaptation procedure required?

Depending on vehicle strategy, relearn or adaptation procedures may be necessary after installation to support proper operation.

Can this transmission be shipped to a residence?

Shipping options depend on carrier access and destination type. Commercial delivery is often easiest, but lift-gate service may be available.

What should I inspect when the unit arrives?

Inspect the pallet or crate, verify paperwork and labels, photograph visible damage, and review the transmission carefully before installation.

Why choose a reman transmission instead of a used one?

A reman transmission corrects internal wear and supports more predictable long-term reliability than an unknown used take-out unit.

Why Buy From Us?

We strive to be the ultimate destination for recycled auto parts. With access to a vast inventory and exclusive parts network, we offer millions of quality parts. We specialize in used engines and transmissions with new stock weekly. Our commitment to quality means that you can trust that you're getting the best possible part for your vehicle.